Jabsco Marine Spare Valvles Kit SPARE VALVLES KIT
Spare valvles kit
Showing 65–96 of 418 results
-
-
Jabsco Par-max Hd Fresh Water Pump JABSCO Par-Max Plus fresh water pump 12V 15l/min
260,00 €Constant flow, very silent, self-priming up to 3 m, sealed manostat tested for up to 4 million cycles. The pump can run dry without getting damaged. IPX6 watertight in compliance with ISO 8846 standards.Fitted with 1/2 snap fittings.
-
Jabsco Par-max Hd Fresh Water Pump JABSCO Par-Max Plus fresh water pump 12V 23l/min
340,00 €Constant flow, very silent, self-priming up to 3 m, sealed manostat tested for up to 4 million cycles. The pump can run dry without getting damaged. IPX6 watertight in compliance with ISO 8846 standards.Fitted with 1/2 snap fittings.
-
Jabsco Par-max Hd Fresh Water Pump JABSCO Par-Max Plus fresh water pump 24V 15l/min
260,00 €Constant flow, very silent, self-priming up to 3 m, sealed manostat tested for up to 4 million cycles. The pump can run dry without getting damaged. IPX6 watertight in compliance with ISO 8846 standards.Fitted with 1/2 snap fittings.
-
Jabsco Washdown Par-max 6 Plus Pump Kit Autoclave HotShot 6HD 12v 70psi
385,00 €Ideal for washing down, this kit includes a Par-Max HD6 pump (increased pressure 4.8 bar), a 90°-strainer and a trigger nozzle.
-
Jabsco Washdown Par-max 6 Plus Pump Kit Autoclave HotShot 6HD 24v 70psi
395,00 €Ideal for washing down, this kit includes a Par-Max HD6 pump (increased pressure 4.8 bar), a 90°-strainer and a trigger nozzle.
-
Macerating Pumps For Toilet Units Whale Gulper Maintenance kit for Whale Gulper macerator
49,00 €It is connected to the toilet unit or to the waste water tanks, is used to drain toilet units or tanks. Virtually unblockable, can run dry, self priming and can be also be used with vacuum toilet units. Materials: nylon/fibreglass + Hypalon rubber + brass + stainless steel. Maximum suction and head of 3 metres,…
-
Macerating Pumps For Toilet Units Whale Gulper Whale Gulper macerating pump 12 V
450,00 €It is connected to the toilet unit or to the waste water tanks, is used to drain toilet units or tanks. Virtually unblockable, can run dry, self priming and can be also be used with vacuum toilet units. Materials: nylon/fibreglass + Hypalon rubber + brass + stainless steel. Maximum suction and head of 3 metres,…
-
Macerating Pumps For Toilet Units Whale Gulper Whale Gulper macerating pump 24 V
470,00 €It is connected to the toilet unit or to the waste water tanks, is used to drain toilet units or tanks. Virtually unblockable, can run dry, self priming and can be also be used with vacuum toilet units. Materials: nylon/fibreglass + Hypalon rubber + brass + stainless steel. Maximum suction and head of 3 metres,…
-
Marco Adjustable-flow Reversible Electric Pump MARCO adjustable-flow reversible electric pump
270,00 €Self-priming reversible electric pump, bronze gears for oil and diesel transfer, 12 and 24V.The electronic control adjust speed to the liquid viscosity. Automatic lock system when the pump has run out of liquid.The built-in keypad can set the motor speed, can stop/start the pump and reverse its flow.
-
Marco Automatic Switch As3 AUTOMATIC SWITCH 12/24V
Float switch for bilge pumps. Dimensions 127x42x110 mm
-
Marco Electronic Unit For Oil Change MARCO electronic unit for oil change
519,00 €Compact electronic unit for oil change for fixed installation on vessels. Used to drain and fill up all onboard applications such as generators, engines, gear drive and gangplanks.Electronic control adjusts the pump motor speed depending on the oil viscosity/temperature and increases revolutions during priming for maximum suction.The system automatically stops working when it runs out…
-
Marco Electronically-operated Double Fresh Water Pump Doppia autoclave a contollo elettr. 2,5 bar 52 l/m
Double version with two electronically-operated pumps working in parallel.If one of the pumps breaks down, water delivery isn’t cut off because the other pump is still operating.Motor speed adapting to the flow. Reduced current draw and noise levels.No accumulator tank.Fitted with overvoltage protection device and a locking system against dry running.The pump operation can be…
-
Marco Electronically-operated Double Fresh Water Pump Doppia autoclave a contollo elettr. 3,5 bar 92 l/m
Double version with two electronically-operated pumps working in parallel.If one of the pumps breaks down, water delivery isn’t cut off because the other pump is still operating.Motor speed adapting to the flow. Reduced current draw and noise levels.No accumulator tank.Fitted with overvoltage protection device and a locking system against dry running.The pump operation can be…
-
Marco High-pressure Washdown Kit MARCO high-pressure washdown kit
Ideal for washdown operations with fresh and salt water.Includes:- high-pressure self-priming electropump- 15-m extensible hose- snap-in spray nozzle, jet lock, check valve and trigger to adjust the flow.
-
Marco Impeller For Up1- Up1-m – Up1/ac Pump IMPELLER FOR UP1- UP1-M – UP1/AC PUMP
Impeller of special nitril rubber. Original spare part for UP1 UP1-M and UP1/AC. Dimensions: 22 x � 51.5 mm – bore � 8 mm.
-
Marco Impeller For Up1-j Pump IMPELLER FOR UP1-J PUMP
Impeller of special nitril rubber. Original spare part for UP1-J. Dimensions: 22 x � 40.5 mm – bore � 8 mm.
-
Marco Impeller For Up1-j Pump UP1-J PUMP 12V.
Impeller of special nitril rubber. Original spare part for UP1-J. Dimensions: 22 x � 40.5 mm – bore � 8 mm.
-
Marco Impeller For Up1-j Pump UP1-J PUMP 24V.
Impeller of special nitril rubber. Original spare part for UP1-J. Dimensions: 22 x � 40.5 mm – bore � 8 mm.
-
Marco Oil Change Kit With Bronze Gears Marco oil changing kit bronze gears 12 V
180,00 €The kit includes:a) Filling/draining pump with ON-OFF reversible switch.b) Intake tubes.c) Battery clips.
-
Marco Oil Change Kit With Bronze Gears Marco oil changing kit bronze gears 24 V
180,00 €The kit includes:a) Filling/draining pump with ON-OFF reversible switch.b) Intake tubes.c) Battery clips.
-
Marco Oil Transfer Electric Pump With Bronze Gears MARCO oil transfer electric pump with bronze gears
365,00 €Self-priming electric pump with bronze gears for oil transfer. Protection strainer included.
-
Marco Pipe Kit Pipe kit
15,00 €8-mm and 6-mm rigid rilsan pipe kit for tapping through the dipstick. For pump models 16.190.xx.
-
Marco Pump Gear Up6 PUMP GEAR UP6 12 V.
Self-priming electric pumpPTFE with bronze gears and for the transfer gasoline non-flammable liquids. Complete with in-line filter brass body. Self priming mt. 1 5. Not for oil.
-
Marco Pump Up6/e-dx 12/24 V PUMP UP6/E-DX 12/24 V
Self-priming autoclave pump with two electronically controlled electric pumps. Motor speed in relation to the required flow rate. Reduced consumption and noise. They eliminate the expansion tank. Self-protected against voltage overloads. The operating status of the pump can be monitored by means of 2 luminous LEDs. End of water block device.
-
Marco Pump With Bronze Gears Ock1-e PUMP OCK1-E 12/24 V.
Pump with bronze gears for diesel transfer equipped with an ELECTRONIC CONTROL panel which guarantees the reversibility of the flow direction the variable speed of the engine in relation to the viscosity of the liquid and the automatic locking at the end of emptying. Complete kit with pliers protection fuse accessories and 20 mm screened…
-
Marco Self-priming Bilge Pump Marco self-priming bilge pump 12 V 28 l/m
101,00 €Rubber impeller, high-quality built, EMI internal noise suppressor. Waterproof body and watertight fairlead. In compliance with ISO 8849/8846 standards.
-
Marco Self-priming Bilge Pump Marco self-priming bilge pump 12 V 35 l/m
140,00 €Rubber impeller, high-quality built, EMI internal noise suppressor. Waterproof body and watertight fairlead. In compliance with ISO 8849/8846 standards.
-
Marco Self-priming Bilge Pump Marco self-priming bilge pump 12 V 45 l/m
165,00 €Rubber impeller, high-quality built, EMI internal noise suppressor. Waterproof body and watertight fairlead. In compliance with ISO 8849/8846 standards.
-
Marco Self-priming Bilge Pump Marco self-priming bilge pump 24 V 35 l/m
140,00 €Rubber impeller, high-quality built, EMI internal noise suppressor. Waterproof body and watertight fairlead. In compliance with ISO 8849/8846 standards.
-
Marco Self-priming Bilge Pump Marco self-priming bilge pump 24 V 45 l/m
165,00 €Rubber impeller, high-quality built, EMI internal noise suppressor. Waterproof body and watertight fairlead. In compliance with ISO 8849/8846 standards.
-
Marco Self-priming Bronze Electric Gear Pump For Diesel Oilantifreeze And Water Transfer Self-priming electric pump 12 V 15 l/min
140,00 €Fitted with in-line inlet strainer. Brass body, stainless steel shaft. Inlets with brass fittings for 14-mm inner Ø hose. It can run dry without damage.