“Veneziani Speedy Carbonium – Carbon-based Antifouling Carbon-based antifouling black 2.5 l” has been added to your cart.
View cart
Showing 20673–20704 of 21730 results
-
Glossy enamel based on specially resins that confers good chemicalresistance in particular to the humidity penetration oils fuel anddetergents. This enamel odorless can be applied directly on uponpreparation GPR wood steel and aluminium.Cover 13 smq./lt. Grey colour.
-
99,00 €
Carbon-based antifouling for maximum performance. Special for both motor and sail racing vessels where smooth bottoms are required. Two-component product.
-
290,00 €
Carbon-based antifouling for maximum performance. Special for both motor and sail racing vessels where smooth bottoms are required. Two-component product.
-
99,00 €
Carbon-based antifouling for maximum performance. Special for both motor and sail racing vessels where smooth bottoms are required. Two-component product.
-
290,00 €
Carbon-based antifouling for maximum performance. Special for both motor and sail racing vessels where smooth bottoms are required. Two-component product.
-
Two-pack medium hard antifouling using carbon as an active component for better performance. Quick drying two coats can be applied in one day. Application must be carried out with spraying equipment. After application it can be wet-sanded with 600 grade abrasive paper to achieve extra smoothness. Cover: 10 smq./lt.
-
Two-pack medium hard antifouling using carbon as an active component for better performance. Quick drying two coats can be applied in one day. Application must be carried out with spraying equipment. After application it can be wet-sanded with 600 grade abrasive paper to achieve extra smoothness. Cover: 10 smq./lt.
-
A pure epoxy compound 100% solids by volume which can removewater from the surface to be treated providing excellent adhesioneven on wet surfaces. Particularly useful for temporary repairs of leaksand cracks in the boat when it is in the water or moving. Subcoat S adheres easily to GRP gel coats old epoxies epoxy tar aswell…
-
Detergent and stain remover for teakRemoves all kind of contaminations from wood. The pH of Teak 1 onlyslightly alkaline therefore it cleans thoroughly removing the soil butleaving the �oily� content of the wood unharmed. Colourless. Bottle lt 1
-
Bleaching agent for teak Sunlight salt and pollution affect the original appearance of teak resulting in a greyish colour. With Teak 2 the wood regains its original colour. Colourless. Bottle lt 1
-
Impregnating and protective agent for teak Teak 3 besides impregnating wood and reducing soil penetration restores the natural oil content of wood. Furthermore Teak 3 enhances the natural colour of teak and makes the surfaces softer to touch. Colourless. Bottle lt 2 5
-
Impregnating and protective agent for teak Teak 3 besides impregnating wood and reducing soil penetration restores the natural oil content of wood. Furthermore Teak 3 enhances the natural colour of teak and makes the surfaces softer to touch. Colourless. Bottle lt 2 5
-
Thinner (5610/6610 )for Adherpox Plastolite proand Unikote Yachting.
-
33,00 €
One-component chlorine gum aluminate primer. Ideal as waterproof and anti-corrosion protection for hulls, iron and sailing hulls, or as sealing coat on old antifoulings.
-
A one-pack chlorinated rubber aluminium primer. This is a general purpose marine paint suitable for hulls and steel structures. Ticoprene can be applied to a zinc primer one or two-pack primers and to old antifouling provided this has good adhesion. It can also be used as a tie-coat for epoxy tar systems. It is highly…
-
A one-pack chlorinated rubber aluminium primer. This is a general purpose marine paint suitable for hulls and steel structures. Ticoprene can be applied to a zinc primer one or two-pack primers and to old antifouling provided this has good adhesion. It can also be used as a tie-coat for epoxy tar systems. It is highly…
-
27,00 €
Bright one-component modified alkyd flatting. Suitable for all kinds of wood.
-
77,00 €
For temporary repairs of underwater cracks of the hull even during navigation. Perfect adhesion to fiberglass, Gel Coat, existing epoxy coating, tar, steel and concrete.
-
One-pack alkyd-urethane finish. High quality excellent dilatation and optimum colour and gloss retention. Suitable for use outside and inside pleasure crafts and houses. This product is very flexible and adheres wellto a wide range of primers undercoats and finishes. It cannot be directlyapplied to inorganic zinc primers or to galvanised panels. Available invarious colours. Not…
-
One-pack alkyd-urethane finish. High quality excellent dilatation and optimum colour and gloss retention. Suitable for use outside and inside pleasure crafts and houses. This product is very flexible and adheres wellto a wide range of primers undercoats and finishes. It cannot be directlyapplied to inorganic zinc primers or to galvanised panels. Available invarious colours. Not…
-
One-pack alkyd-urethane finish. High quality excellent dilatation and optimum colour and gloss retention. Suitable for use outside and inside pleasure crafts and houses. This product is very flexible and adheres wellto a wide range of primers undercoats and finishes. It cannot be directlyapplied to inorganic zinc primers or to galvanised panels. Available invarious colours. Not…
-
-
24,00 €
Superior one-component alkyd-polyurethane varnish. Suitable for interiors and exteriors. Not fit for continuous immersion.
-
24,00 €
Superior one-component alkyd-polyurethane varnish. Suitable for interiors and exteriors. Not fit for continuous immersion.
-
24,00 €
Superior one-component alkyd-polyurethane varnish. Suitable for interiors and exteriors. Not fit for continuous immersion.
-
Two-pack high-build paint with a dual-purpose: protection and finish.This paint can be applied to any type of pre-existing paint. Unikote withstands atmospheric agents immersion abrasion wear and has a high chemical and mechanical resistance. It can be applied both to protect the hull and as a finish for decks and topsides. Cover: 5 3 smq./lt….
-
Stucco Velox is generally used for final smoothing as part of one-packsystems used on topsides and superstructure with a maximumthickness of one millimetre per coat. It should not be used in systemssubject to continuous or intermittent immersion in water. Applicationin thicknesses of more than one millimetre can cause cracking in onepack systems used for topsides…
-
34,00 €
Hard matrix copper-free antifouling for propellers, shafts, stern drives, flaps, etc.For professional use only. UE 2020/1182 regulation.
-
34,00 €
Hard matrix copper-free antifouling for propellers, shafts, stern drives, flaps, etc.For professional use only. UE 2020/1182 regulation.
-
34,00 €
Hard matrix copper-free antifouling for propellers, shafts, stern drives, flaps, etc.For professional use only. UE 2020/1182 regulation.
-
Glossy wood finish. A clear two-pack glossy varnish. Exceptionallyresistant to atmospheric agents and the marine environment. Excellentlevelling and resistance to abrasion. Enhances the beauty of the woodwithout problems of varnish shrinkage. Particularly recommended forthe treatment of visible wood surfaces both inside and outside.Cover: 19 smq./It.
-
Two-component water-based polyurethane finish transparentsatin non yellowing. High resistance to the marine environment.Particularly suitable for the treatment of bulkheads furniture and allinternal wood surfaces. Excellent expansion and resistance to abrasion.Ready to use and easy to apply. Not suitable for subject supportswith continuous immersion. Excellent also for floors and paiolatiWood. Theoretical yield 12 mq./It.